Core cutting

Name: Core cutting
SKU: 126262721

الدقم، الوسطى

منذ 4 أيام

التفاصيل

الحالةجديد

الوصف

WHEN TO USE A CONCRETE WALL SAW. Concrete wall saws are typically used on vertical surfaces when a new doorway, window or HVAC openings are needed. Wall sawing employs a diamond blade on a track-mounted system that can be used for vertical or horizontal cuts. These saws run on hydraulic or electric power and are also commonly referred to as concrete track saws. Wall sawing allows for precise cuts in both concrete and masonry structures. Wall sawing can be performed up to 30″ deep. Cutting can also be performed from both sides of the wall, giving a total depth of up to 60″. If your opening requires a specific angle through the concrete, this saw can accommodate. Typical Applications Include: Straight, smooth finished openings in walls, ceilings, and floors Accurately sized, fixture ready openings Bevel cutting for a chamfered edge Flush cutting against the surface Wall sawing employs a circular diamond blade on a track-mounted machine. The track is attached to horizontal walls or steep inclines that will not permit the use of flat saws. Wall or track sawing is typically specified to cut precise dimensional door, vent and window openings. It is also an excellent choice for creating precise openings in any concrete structure. Generally speaking, a concrete wall saw is more versatile than a slab saw. We can cut just about anything that you can mount a track or rail to. At JEM Concrete we have even used a concrete wall saw to turn large boulders into functional benches – by using a custom track system, we don’t even need to start with a flat surface. While we start out with smaller blades for a guaranteed straight cut, we stock blades as large as 72″ in diameter, allowing for a cut that is 30-32″ deep. With custom rails we have cut the inside of a circle. We also commonly use concrete wall saws for stairs, both to remove them, or make them narrower.

الموقع

عُمان